Universal, durable, waterproof and airtight protective coating.
For sealing and protecting different materials
such as concrete, metal, stone, wood, bitumen, zinc, PVC, etc.
Especially good for indoor and outdoor applications (bathrooms, basements, balconies, roofs, etc.)
as well as gutters, shower nozzles, pipe passages, wall/floor connections,
expansion joints, window frame connections and components in contact with the ground.

Griffon HBS-200® Liquid Rubber Cartridge (310 g)
Universal, durable, waterproof and airtight protective coating.

Properties

Waterproof and airtight
Permanently elastic (900%)
Good adhesion on many substrates
Protects against corrosion and erosion
Easy to process
Durable quality: Ageing resistant of at least 20 years (tested according to EN 1297)
Weather- and UV-resistant
Salt and chemical resistant
Paintable
Solvent-free
VOC-free
Non-toxic
Water-based

Directions

Apply the protective paint with a cartridge gun and spread with a spatula within 10 to 15 minutes.
The layer thickness must be at least 2 mm.
After 30 to 60 minutes, a surface skin is formed, which can be loaded with (light) rain after 2 hours.
Waterproof after 24 hours.
Fully cured after 48 hours, depending on the amount applied and the environmental conditions.

Please
note Only process at temperatures above +5 °C.
After 30 to 60 minutes, a surface skin is formed, which can be loaded with (light) rain after 2 hours.
Waterproof after 24 hours.