ELECRO - Digital Equipped Heat Exchanger
£ 695.00
Order in the next Hours Mins and Seconds,
To get your watch delivered on Wednesday
In Stock
  • Robust, durable construction
  • Titanium tube bundle
  • Straight through water path
  • 316 Stainless Steel shell with special polyamide fittings
  • May be floor or vertically wall mounted


The Elecro heat exchanger is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a densely populated multi-tubular pure Titanium tube bundle which is secured by the purpose designed polyamide / rubber tube sheet. The heat exchanger shell is constructed from BS 316 Stainless Steel this is capped at each end with primary and secondary moulded fittings manufactured from specially formulated polymer alloy material

The heat exchanger is supported on two swivel feet; to facilitate either wall or floor mounting.

The fully equipped heat exchanger is supplied complete with:

  • Digital control thermostat with Priority heating
  • NTC temperature sensor
  • Grundfos booster pump
  • Flow switch (With gold tipped reed switch)
  • 2 x 1" male/male Brass primary connections
  • 1 x 1" Brass Non-return valve
  • 1 x 1" female/female brass fitting
  • 1 x Titanium thermostat pocket

The Elecro fully equipped heat exchanger has been designed to allow the installation engineer to select which way to plumb the primary and secondary water to achieve maximum thermal gain, this is achieved by routing the primary (HOT) flow in an opposing direction to the secondary (POOL) water.


The required pool temperature can be easily input into the digital thermostat using the keypad on the front panel which is then clearly displayed, the actual water temperature is also displayed. The Elecro digital equipped heat exchanger features priority heating which enables the thermostat to override the pool circulation pump timer to switch on the pool recirculation pump and the heating appliance in order to maintain the required pool temperature at all times.

A volt free contact is supplied. This can be wired to the heating appliance to switch it on and off.

Elecro heat exchangers are ideal for use with gas or oil fired boiler circuits, solar panels, heat pumps or chillers.

Download Product Data Sheet

Download Installation & Operating Manual


Customer Reviews (0)